دراسة تأثير القطر الأعظمي للحصويات الخشنة في بعض خواص البيتون الخالي من الرمل
Abstract
دراسة تأثير القطر الأعظمي للحصويات الخشنة في بعض خواص
البيتون الخالي من الرمل
فريدة شومان
يهدف هذا البحث إلى دراسة تأثير القطر الأعظمي للحصويات الخشنة في خواص البيتون الخالي من الرمل، تم إعداد ثلاث خلطات بيتونية باستخدام ثلاثة أقطار مختلفة للحصويات الخشنة هي : mm(9.5, 12.7, 19 ) مع اعتماد قيم ثابتة لكل من نسبة الحصويات إلى الإسمنت (A/C=6) ونسبة الماء إلى الإسمنت (0.42 W/C=) لكل الخلطات. أجريت الفحوصات على البيتون المتصلب لدراسة تأثير القطر الأعظمي للحصويات الخشنة في المقاومة على الضغط البسيط ونسبة الامتصاص والكثافة والمسامية والناقلية الحرارية.
أظهرت النتائج أن زيادة القطر الأعظمي للحصويات الخشنة من mm9.5 إلى mm19 أدى إلى نقصان في الكثافة والمقاومة على الضغط البسيط بشكل واضح، وبالمقابل ازدادت المسامية ونسبة امتصاص الماء مع زيادة القطر الأعظمي للحصويات المستخدمة في الخلطات البيتونية الثلاث.
تزايدت المقاومة على الضغط البسيط بعمر 45 يوماً، من ) 6.69 Mpa ) إلى ( 11.55 Mpa ) عندما تناقص القطر الأعظمي للحصويات من mm19 إلى mm9.5 .
This work examines the effect of the maximum aggregate size on the properties of no fines concrete. In this work, three mixes were prepared with three sizes of coarse aggregate, (9.5, 12.7, and 19) mm, with using fixed values for each coarse aggregate/cement ratio (A/C=6) and water/cement ratio (W/C=0.42) for all mixes. Tests are carried out on hardened concrete to investigate the effect of the maximum aggregate size on the compressive strength, porosity%, absorption%, density, and thermal conductivity.
Results showed that increasing the maximum aggregate size from 9.5 to 19 mm for the used mixes reduces the compressive strength and density clearly, on the other hand the porosity and the absorption increase with increasing the maximum aggregate size for all studied mixes.
It was found that the compressive strength at 45 days increases from ( 6.69 Mpa) to ( 11.55 Mpa). when the maximum aggregate size decreases from 19 to 9.5 mm.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Fttps://creativecommons.org/licenses/by-nc-sa/4.0/

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.