تأثير المادة البادئة والمادة المسرعة على الخواص الميكانيكية للبولي استر غير المشبع

Authors

  • عامر الأزكي

Abstract

يهدف البحث إلى دراسة تأثير مواد الإضافة ( الميثيل إيثيل كيتون بيروكسيد MEKP + الكوبالت نفتنات) على القيم المميزة لمنحنيات الشد ( إجهاد الشد والاستطالة النسبية عند التحطم ) لعينات من البولي استر غير المشبع، المسلحة وغير المسلحة بطبقة من الألياف الزجاجية العشوائية. أظهرت نتائج الاختبارات أن البارامترات المدروسة (إجهاد الشد والإستطالة النسبية عند التحطم) تتأثر بوضوح بمواد الإضافة وأن النسب المثلى للعينات غير المسلحة المحضرة على البارد هي:(1% MEKP + 1% Cobalt Naphthenate) و (0.8% MEKP + 1% Cobalt Naphthenate) وللعينات المسلحة بطبقة من الألياف الزجاجية والمحضرة على البارد هي: (1% MEKP + 0.8% Cobalt Naphthenate) و ((0.2-0.4) % MEKP + 1% Cobalt Naphthenate ). أظهرت الاختبارات أيضاً أن أفضل قيم للشد عند التحطم يمكن الحصول عليها عند تحضير العينات على الساخن بدرجة حرارة 100 Cºوذلك بعد حدوث التصلب في الفرن والمعالجة الحرارية عند هذه الدرجة لمدة زمنية 15 min. This search aims to study the effect of additive materials ( Ethyl Methyl Keton Peroxide MEKP , Cobalt Naphthenate ) at the important values of (stress-strain) curves ( stress and elongation at break ) for the preparing specimens from reinforced and non- reinforced with fiber glass unsaturated polyester resin. The result showed that the investigated parameters are clearly affected with using additive materials and the optimum concentration for non-reinforced specimens which was curing in room temperature was (1% MEKP + 1% Cobalt Naphthenate) and (0.8% MEKP + 1% Cobalt Naphthenate), and for reinforced specimens with fiber glass was:( 1% MEKP + 0.8% Cobalt Naphthenate) and ((0.2-0.4) % MEKP + 1% Cobalt Naphthenate). The results showed also that it is possible to get the better values of tensile stress at break when the specimens was curing in oven at 100 Cº and treated at this temperature for 15 min

Downloads

Published

2017-07-26

How to Cite

1.
الأزكي ع. تأثير المادة البادئة والمادة المسرعة على الخواص الميكانيكية للبولي استر غير المشبع. Tuj-eng [Internet]. 2017Jul.26 [cited 2025Jul.29];38(4). Available from: https://journal.latakia-univ.edu.sy/index.php/engscnc/article/view/2966

Issue

Vol. 38 No. 4 (2016): العلوم الهندسية

Section

Articles

License

Copyright (c) 2017 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.