Design of Piled-Raft using the PLAXIS 3D

Authors

  • ثراء مبارك جامعة تشرين

Keywords:

Piles– contribution of the raft – PLAXIS 3D- simplified method

Abstract

The traditional design of piles in the foundations of piled-raft buildings assumes that the total loads of the building are distributed only to the piles, and the role of the raft as a structural element that transfers the load to the piles is limited only, as the method adopted in the Syrian Arab code. Therefore, many piles increase the economic cost of piled-raft foundations.In this research, the pilled-raft of a 16-story residential building in Latakia was modeled using the PLAXIS 3D program to determine the percentage of the contribution of both the raft and the piles from the total loads of the building and compared with the proposed simplified method of calculating the contribution of the raft, which is based on the principle of the additional effect of the piles as raft columns, which reduces their settlement, the raft's contribution reached 21.11%, thus reducing the number of piles, which became 99 piles with 2m spacing instead of 120 piles with 1.8m spacing in the case of neglecting the raft's contribution, It is possible to consider this method safe to use compared to the Poulos method, which gave a higher percentage of the raft contribution, reaching 36.8%, compared to the analytical model of PLAXIS 3D program, which reached 28.36%.

Downloads

Published

2025-02-24

How to Cite

1.
مبارك ث. Design of Piled-Raft using the PLAXIS 3D . Tuj-eng [Internet]. 2025Feb.24 [cited 2025Sep.12];46(6):169-80. Available from: https://journal.latakia-univ.edu.sy/index.php/engscnc/article/view/18576

Issue

Vol. 46 No. 6 (2024): Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2025 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
                                                                  ADOConnection.CacheExecute(3600, SELECT 				o.submission_id, 				MAX(s.context_id) AS journal_id, 				MAX(i.date_published) AS i_pub, 				MAX(p.date_published) A..., Array[2]) % line  132, file: DAO.inc.php
                                                               DAO.retrieveCached(SELECT 				o.submission_id, 				MAX(s.context_id) AS journal_id, 				MAX(i.date_published) AS i_pub, 				MAX(p.date_published) A..., Array[2], 3600) % line   91, file: ArticleSearchDAO.inc.php
                                                            ArticleSearchDAO.getPhraseResults(Object:Journal, Array[1], null, null, , 500, 1) % line  202, file: SubmissionSearch.inc.php
                                                         SubmissionSearch._getMergedPhraseResults(Object:Journal, Array[1], , null, null, 500, 1) % line  147, file: SubmissionSearch.inc.php
                                                      SubmissionSearch._getMergedKeywordResults(Object:Journal, Array[4], , null, null, 500, 1) % line  195, file: SubmissionSearch.inc.php
                                                   SubmissionSearch._getMergedPhraseResults(Object:Journal, Array[4], null, null, null, 500, 1) % line  147, file: SubmissionSearch.inc.php
                                                SubmissionSearch._getMergedKeywordResults(Object:Journal, Array[3], null, null, null, 500, 1) % line  133, file: SubmissionSearch.inc.php
                                             SubmissionSearch._getMergedArray(Object:Journal, Array[1], null, null) % line  264, file: SubmissionSearch.inc.php
                                          SubmissionSearch.retrieveResults(Object:Request, Object:Journal, Array[1], null, null, null, Object:DBResultRange, Array[1]) % line   92, file: RecommendBySimilarityPlugin.inc.php
                                       RecommendBySimilarityPlugin.callbackTemplateArticlePageFooter(Templates::Article::Footer::PageFooter, Array[3]) % line  107, file: HookRegistry.inc.php
                                    HookRegistry.call(Templates::Article::Footer::PageFooter, Array[3]) % line 1256, file: PKPTemplateManager.inc.php
                                 PKPTemplateManager.smartyCallHook(Array[1], Object:Smarty_Internal_Template) % line   43, file: 42362804174f266c598cdb32c3208fc745b92101^1c372c95cd85572e0fbc9a53d0323a0b229cfc78_0.app.frontendpagesarticle.tpl.php
                              content_6824e8afae4963_68091933(Object:Smarty_Internal_Template) % line  123, file: smarty_template_resource_base.php
                           Smarty_Template_Resource_Base.getRenderedTemplateCode(Object:Smarty_Internal_Template) % line  114, file: smarty_template_compiled.php
                        Smarty_Template_Compiled.render(Object:Smarty_Internal_Template) % line  216, file: smarty_internal_template.php
                     Smarty_Internal_Template.render(false, 1) % line  232, file: smarty_internal_templatebase.php
                  Smarty_Internal_TemplateBase._execute(Object:Smarty_Internal_Template, null, 42362804174f266c598cdb32c3208fc745b92101, null, 1) % line  134, file: smarty_internal_templatebase.php
               Smarty_Internal_TemplateBase.display(frontend/pages/article.tpl, null, 42362804174f266c598cdb32c3208fc745b92101, null) % line  924, file: PKPTemplateManager.inc.php
            PKPTemplateManager.display(frontend/pages/article.tpl) % line  292, file: ArticleHandler.inc.php
         ArticleHandler.view(Array[1], Object:Request) % line  391, file: PKPRouter.inc.php
      PKPRouter._authorizeInitializeAndCallRequest(Array[2], Object:Request, Array[1], false) % line  231, file: PKPPageRouter.inc.php
   PKPPageRouter.route(Object:Request) % line  143, file: Dispatcher.inc.php
Dispatcher.dispatch(Object:Request) % line  281, file: PKPApplication.inc.php
PKPApplication.execute() % line   68, file: index.php