تصنيع أغشية بوليميرية متشابكة ضوئياً من مزيج (البوليّ فنيل الكحوليّ والبوليّ إيتيلينغليكول) لمعالجة المياه المحتوية على بعض شوارد المعادن الثقيلة
Abstract
تمّ في هذا البحث تصنيع أغشية بوليميرية للعمل في محطات التناضح العكسي من مزائج تحتوي البولي فنيل الكحولي (PVA)مع البولي إيتيلينغليكول(PEG) لمعالجة مياه الصّرف الصناعي المحتوية على شوارد الرصاص والنحاس والكوبالت، وقد استخدمت تقانة التشعيع الضوئي ، وبعض المواد الملدّنة مثل الغليسيرين، وبعض المونوميرات مثل حمض الأكريليك لتعديل الخواص الفيزيوميكانيكية للأغشية المصنّعة ، وتحسين انتقائيتها تجاه نبذ الشوارد المعدنيّة.
وقد أظهرت النتائج تحسّن الخواص الميكانيكية للأغشية المصنّعة في الحالة الرطبة مع زيادة نسبة الغليسيرين، وكذلك مع زيادة الجرعة الضوئية، كما يزداد تدفق الماء النقي عبر الغشاء مع زيادة كل من الضغط المطبق، ومع زيادة التحميل بحمض الأكريليك، بينما يتناقص مع زيادة الجرعة الضوئية ، والتركيز الأولي للشوارد المعدنية وقيمة pH)) مياه التغذية، فيما سلوك نبذ الغشاء للشوارد عكس سلوك التدفق، تصل نسبة نبذ الأغشية المعالجة بالأشعة الضوئيّة للشوارد المعدنية في الأوساط المعتدلة إلى 98%، ومعدل التدفق إلى حوالى 70[l/m2.h].
poly(vinyl alcohol)(PVA)/polyethyleneglycol(PEG)membranes were prepared to use it in reverse Osmosis units to remove some heavy metal ions (Co,Cu,Pb) from water.
(PVA)/ (PEG) membranes were modified by acrylic acidand glycerine, then they were irradiated by UV radiation to improve physico-mechanical properties and produce adequate selectivity in metal ions separation. The influence of operating pressure, spike ions concentration and pH on the membranes performance were studied.
The mechanical properties of a membrane in wet state were enhanced upon photo-irradiation and modifieing membranes with glycerine. the flux of water increased with increasingoperating pressure and acrylic acid loading, and decreased with increasing photo dose and spike ions concentration and pH,The rejection of ions appeared to be inversely related with the flux. The average rejections of metal ions and flux of modified membranes with photo irradiation under optimum conditions reached 98% and 70[l/m2.h] respectively.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to the Tishreen University Journal -Basic Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal -Basic Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal -Basic Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.